 | Pentair Water FPWF-ORKIT t O-ring Kit Water Filter
Brand: PENTAIR WATER Model: FPWF-ORKIT Part Number: FPWF-ORKIT
"PENTAIR WATER" WATER FILTER
Packed: Carded
Replacement o-rings
Set of 3
Fits all water filters except FH1, WH2, WH3 and WH4 | *$5.99 |
 | Pentek C1-20, 20" Carbon Impregnated Cellulose Filter
Brand: Pentek Part Number: C1-20
#20 Filter, 20" Long
- C Series Offer an Economical Solution for all General-Purpose Water Filtration Needs
- Constructed of a Carbon Impregnated Cellulose
- Dual Purpose Media Filters Out Fine Sediment Particles
- Reduces Unwanted Taste, Odor and Chlorine Taste and Odor from Your Tap Water*
- Polyester Reinforcement backing and External Netting Provide Additional Strength and Dirt-Loading Capacity
- Suited for a Wide Range of Residential Applications and Make Excellent Polishing Filters When Used in Process or Closed-Loop Streams
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 1 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >5,000 Gallons @ 2gpm* (>18,900 liters @7.6 L/min)
- Max Dimensions: 2-5/8" x 20" (67mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 5 gpm (0.1 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 14 Filters per Case | *$17.75 |
 | Pentek CBC-20, 20" Carbon Block Filter
Brand: Pentek
#20 Filter, 20" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water*
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts*
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >45,000 Gallons @ 2 gpm* (>170,300 liters @7.6 L/min)
- Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 3.0 psi @ 2 gpm (0.21 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$34.82 |
 | Pentek CBC-20BB 20" Carbon Block Water Filter
Brand: Pentek Part Number: CBC-20BB
#20 Filter, 20" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts*
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >150,000 Gallons @ 4 gpm* (>567,800 liters @ 15.1 L/min)
- Max Dimensions: 4-5/8" x 20" (117mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 8.5 psi @ 4 gpm (0.59 bar @ 15.1 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$87.99 |
 | Pentek CBC-CC, 10" Carbon Block Water Filter
Brand: Ametek
#10 Filter, 10" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >50,000 Gallons @ 2 gpm* (>189,300 liters @7.6 L/min)
- Max Dimensions: 4-5/8" x 9-3/4" (117mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 4.6 psi @ 2 gpm (0.32 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$56.00 |
 | Pentek ECP1-10, 10" Pleated Sediment Water Filter, 1 Micron
Brand: Pentek Part Number: ECP1-10
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 1 Microns (Tan Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$7.44 |
 | Pentek ECP1-BB Pleated Cellulose/Polyester Water Filter, 1 Micron
Brand: Pentek
ECP1-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 1 Microns (Tan Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.70 |
 | Pentek ECP20-20BB, 20" Pleated 20 Micron Water Filter
Brand: Pentek Part Number: ECP20-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 20 Microns (Blue Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
| Pentek ECP5-10, 10" Pleated Sediment Water Filter
Brand: Pentek Part Number: ECP5-10
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 5 Microns (White Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$13.67 |
 | Pentek ECP5-20BB, 20" Pleated Cellulose/Polyester Water Filter, 5 Micron
Brand: Pentek Part Number: ECP5-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 5 Microns (White Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek ECP50-20BB, 20" Pleated Cellulose/Polyester Water Filter, 50 Micron
Brand: Pentek
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 50 Microns (Yellow Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek ECP50-BB Pleated Cellulose/Polyester Water Filter, 50 Micron
Brand: Pentek
ECP50-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 50 Microns (Yellow Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.14 |
 | Pentek EP-20, 20" Carbon Block Filter
Brand: Pentek Part Number: EP-20
#20 Filter, 20" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >12,000 Gallons @ 2gpm* (45,400 liters @7.6 L/min)
- Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 3.4 psi @ 2 gpm (0.23 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$19.75 |
 | Pentek EP-20BB, 20" Carbon Block Water Filter
Brand: Pentek Part Number: EP-20BB
#20 Filter, 20" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >40,000 Gallons @ 4gpm* (151,400 liters @15.1 L/min)
- Max Dimensions: 4-5/8" x 20" (118mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 5.5 psi @ 5 gpm (0.38 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$59.92 |
 | Pentek EPM-BB 10" Carbon Block Water Filter
Brand: Pentek
#10 Filter, 10" Long
- EPM Series are a Modied Version the the "EP Series" Filter
- Economically Priced makes This Filter Suitable for Taste, Odor and Chlorine Taste and Odor Reduction
- Highest Carbon Block Dirt-Holding Capacity for Maximum Filter Life
- Manufactered Using a Patented Process and Entirely from FDQ Compliant Material
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Ideal Choice for a Wide Range of Residential, Food Service, Commercial and Industrial Applications
- Micron Rating: 10 Micron
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Chlorine Taste & Oder Reduction @ Flow Rate: >15,000 Gallons @ 2 gpm* (>56,750 liters @7.6 L/min)
- Max Dimensions: 4-1/2" x 9-3/4" (118mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 5.0 psi @ 2 gpm (0.35 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$33.45 |
 | Pentek NCP-10, 10" Carbon Impregnated Polyester Filter
Brand: Pentek
#10 Filter, 10" Long
- NCP Series Filters are Excellent Polishing Filters, Closed Loop Streams
- Ideal for Post Revese Osmosis and Well Water Applications
- Provides Sediment Filtration and Chlorine and Taste Reduction
- Constructed of a Carbon Impregnated Non-Cellulose Media
- Non-Cellulose Media Resists to Bacterial Attack
- Ideal for Municipal and Non-Chlorinated Water Applications
- Pleated for Maximum Dirt-Holding Capacity
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 10 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: 225 Gallons @ 1gpm* (850 liters @3.8 L/min)
- Max Dimensions: 2-1/2" x 9-3/4" (64mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 2 psi @ 3 gpm (0.1 bar @ 11 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$11.50 |
 | Pentek WP.5BB97P Wound Polypropylene Water Filter, 0.5 Micron
Brand: Pentek Part Number: WP-5BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 0.5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.90 |
| Pentek WP1BB97P Wound Polypropylene Water Filter, 1 Micron
Brand: Pentek Part Number: WP1BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.29 |
 | Pentek WP5BB20P Wound Polypropylene Water Filter, 5 Micron
Brand: Pentek Part Number: WP5BB20P
#20 Filter, 20" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$47.75 |
| Pentek WP5BB97P, Wound Polypropylene Water Filter, 5 Micron
Brand: Pentek Part Number: WP5BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.00 |
 | Pentek WPX100BB97P Wound Fibrillated Polypropylene Water Filter, 100 Micron
Brand: Pentek
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- No Need to Rise Prior to Installation if Surfactants are a Concern
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 100 Microns
- Max Dimensions: 4-1/2" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$17.68 |
 | Permeate Pump for Reverse Osmosis (RO) Systems
Brand: Seisse
We provide the very best water filtration and purification products, promoting a healthier and Greener tomorrow. All products contain the very best in materials and workmanship and are backed by a 100% LIFETIME Warranty. Your Permeate Pump includes: 1 x Permeate Pump as pictured -Solid Construction - Mounts to existing cabling in your Reverse Osmosis System(mounting bracket included) - 1/4" IPS Inlet Water Line Connection. Our Permeate Pump is a simple revolutionary device, requiring NO electricity and simply powered by the hydraulic energy of brine water usually lost to the drain. The Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. The RO- membrane always sees the full pressure across the membrane even if the tank is almost up to the same pressure. This way the system does not lose its performance. Systems Using the Permeate Pump Technology Don't Show Negative Changes In the System Recovery Rate. These pumps dramatically improve the efficiency of R.O. water production; Fills product tank up to 4 times more rapidly, while reducing waste-water by up to 80% -- Improves recovery rates by as much as 400% -- Increases contaminant rejection -- Ideal for membranes rated up to 100 GPD - Effective for inlet water pressure as low as 25 psi -- Increases membrane life, lowers TDS creep -- Increased water pressure ensures a REDUCTION in TDS count. | *$53.39 |
 | Plump Chef Collection Hand-painted Water Jar
Brand: ecWorld
This beautiful top-of-the-line Water Jug is part of the Plump Chef Collection - it's dishwasher safe, and is both handcrafted and hand-painted to perfection! MSRP $115 | *$59.99 |
 | Prefilter 5 micron
Brand: Healthy Water Supply
Standard 10" P.P. Prefilter 5 micron Rating. This Sediment Pre-filter removes hard sediment particles, such as rust, sand and silt.Compatible as a substitute for following pre filters:Watts Premier 5 Micron Sediment FilterCulligan/USFilter/Ametek/Kleen-Plu s P5, Sears 34362, American Plumber W5P, Ace Hardware 45331, MasterPlumber TrueValue 529-286, Flotec RS3, GE FXUSCCulligan, Cuno, AquaPure, Omni, Sears, Fulflo, Teledyne WaterPik, Ace, Master Plumber, Flotec, Honeywell, General Electric, American Plumber, and most other water filter housings for 10" x 2.5" filters | *$4.99 |
 | Prefilter CTO
Brand: Healthy Water Supply
Standard 10" C.T.O. Prefilter. Removes free chlorine and organic chemicals.Compatible as a substitute for following pre filters:Watts Premier 5 Micron Carbon Block filter, Omni CB1, Teledyne WaterPik IR-70, Sears 3480, American Plumber W-30 / American Plumber W.5CB, Ace Hardware 4158721, MasterPlumber TrueValue 529-324, Flotec TO3, GE FXULC, | *$6.99 |
 | Prefilter GAC
Brand: Healthy Water Supply
Standard 10" G.A.C. Prefilter. Granulated Activated Carbon, can remove up to 95% of VOCs, TOCs, chlorine, chemicals and others contaminants.Compatible as a substitute for following pre filters:Watts Premier 56 cubic inch GAC (granular activated carbon) filters | *$6.99 |
 | PUR RF1350 - Replacement Water Filter
Brand: PUR Model: RF1350 / 37-300 | *$5.97 |
 | Pur Water Filtration System with 2 Filters
Brand: ShopZeus Part Number: 23537429
Enjoy crisp, clean, refreshing water with this water purification system. The horizontal faucet mount* filter reduces lead and trihalomethanes from water. With this economical alternative to bottled water, you will enjoy the fresh taste with every sip.<b>Product Features:</b><ul>Removes 99.99% of microbial cysts, cryptosporidium and giardiaElectronic filter includes life indicator so you know when the power is running lowIncludes 2 filters</ul>(Model 72398700609)<i>*Not compatible with pull-out faucets.</i> | *$59.98 |
 | Pure Flo Ii 24gpd Reverse Osmosis Unit
Brand: Coralife Part Number: 76000
Pure flo ii 24gpd reverse osmosis unit | *$206.94 |
 | The PurestOne (tm) CT-1 Counter Top Water Purifier System. Save, Save, Save!
Brand: The PurestOne Model: CT-1 Part Number: CT-1
The PurestOne (tm) CT-1 Counter Top System with Advanced Sub-Micron Filtration Technology restores the natural good taste and purity of your water by removing a vast range of undesirable contaminants while simultaneously leaving in the beneficial dissolved minerals. The PurestOne's (tm) superior performance has been proven by independent laboratory tests to produce the cleanest, safest, and best tasting drinking water you will ever experience. Laboratory Tested according to stringent EPA protocol. Proven to Meet & Exceed SUB-MICRON, Class I, NSF Standards 42, 51 & 53. Removes harmful heavy metals including Lead AND Mercury. Removes microorganisms including Giardia AND Cryptosporidium. Removes harmful chemicals including Arsenic V, Chlorine, Benzene, Chloroform, MTBE, Pesticides, Trihalomethanes (THM's), Polychlorinated Biphenyls (PCB's), Trichloroethylene (TCE) and Volatile Organic Compounds (VOC's). Does NOT Remove dissolved minerals that are potentially beneficial for good health including Calcium, Magnesium and Potassium. The PurestOne CT-1 Counter Top Drinking Water Purification System "One-Pack" includes: ONE PurestOne TP-1 Filter Cartridge, attractive faucet, diverter, tubing, fittings and complete 5-minute installation guide. Color: White & Stainless Steel. Replacing The PurestOne Filter Cartridge once a year, or every 750 gallons, is all that's recommended to maintain peak efficiency. The PurestOne TP-1 Filter Cartridge is also compatible with General Ecology's Seagull® IV X-1, X-1F, X-1B, X-1D or X-1P drinking water systems and is completely interchangeable with Seagull® IV RS-1SG and RS-1SG (CA) filter cartridges. PurestOne UC-1 UnderCounter Model also available. At just $54.95 for yearly cartridge replacements, our 2 unit price, you'll produce exceptionally HIGH QUALITY purified drinking water for only 7 cents per gallon, and save well over $10,000.00 in ten years versus bottled water! | *$279.95 |
 | The PurestOne (tm) UC-1 UnderCounter Water Purifier System. Save, Save, Save!
Brand: The PurestOne Model: UC-1 Part Number: UC-1
The PurestOne (tm) UC-1 UnderCounter System with Advanced Sub-Micron Filtration Technology restores the natural good taste and purity of your water by removing a vast range of undesirable contaminants while simultaneously leaving in the beneficial dissolved minerals. The PurestOne's (tm) superior performance has been proven by independent laboratory tests to produce the cleanest, safest, and best tasting drinking water you will ever experience. Laboratory Tested according to stringent EPA protocol. Proven to Meet & Exceed SUB-MICRON, Class I, NSF Standards 42, 51 & 53. Removes harmful heavy metals including Lead AND Mercury. Removes microorganisms including Giardia AND Cryptosporidium. Removes harmful chemicals including Arsenic V, Chlorine, Benzene, Chloroform, MTBE, Pesticides, Trihalomethanes (THM's), Polychlorinated Biphenyls (PCB's), Trichloroethylene (TCE) and Volatile Organic Compounds (VOC's). Does NOT Remove dissolved minerals that are potentially beneficial for good health including Calcium, Magnesium and Potassium. The PurestOne UC-1 UnderCounter Drinking Water Purification System "One-Pack" includes: ONE PurestOne TP-1 Filter Cartridge, attractive faucet, tubing, fittings, mounting bracket and complete 20-minute installation guide. Color: Black & Stainless Steel. Replacing The PurestOne Filter Cartridge once a year, or every 750 gallons, is all that's recommended to maintain peak efficiency. The PurestOne TP-1 Filter Cartridge is also compatible with General Ecology's Seagull® IV X-1, X-1F, X-1B, X-1D or X-1P drinking water systems and is completely interchangeable with Seagull® IV RS-1SG and RS-1SG (CA) filter cartridges. PurestOneTM UnderCounter Model also available. At just $54.95 for yearly cartridge replacements, our 2 unit price, you'll produce exceptionally HIGH QUALITY purified drinking water for only 7 cents per gallon, and save well over $10,000.00 in ten years versus bottled water! | *$279.95 |
 | Purewaterdispenser- 2-temp 1500
Brand: Vertex Model: PWC-1500 F/S Part Number: PWC-1500 F/S | *$589.95 |
 | Purewaterdispenser-3-temp 3000
Brand: Vertex Model: PWC-3000F Part Number: PWC-3000F
PWC-3000F 3-Temp Model - Sediment & Carbon Filtration. Bottle-less water dispenser with filtration provides hot, room and cold temperature water from your tap that is safe, clean and great tasting. | *$609.95 |
 | Purewaterdispenser-hot & Cold 7000
Brand: Vertex Model: PWC-7000F Part Number: PWC-7000F | *$809.95 |
 | Purwater Water Filter FHO-34
Brand: Purwater
Purwater water filter is less expensive and much more convenient than bottled water. It protects household plumbing. It models for main water supply line or single tap. It can be used with a variety of cartridges, to remove scale, sediment, taste and odor. | *$11.38 |
| | Regal Purewater System Activated Carbon Filter No. K6781db
Brand: Regal Model: K6781db Part Number: K6781db | *$8.00 |
 | Replacement Filter Module for Rhino® Whole House System
Brand: Aquasana
This high-capacity, 3-stage, dual-chamber water filter unit is virtually maintenance-free for 3 years or 300,000 gallons of use! Average usage for a family of 4 or 5 is 100,000 gallons/year. This main filter unit is easily replaced every three years, usually without a plumber. Less expensive than bottled water, and you drink, shower, bathe and live in healthy water! You will notice softer skin and hair in just a few days by showering and bathing in filtered water. ALWAYS ASK FOR PRODUCT CERTIFICATION BEFORE BUYING. The Rhino® EQ-300 Whole House Water Filter has completed three years of evaluation by Underwriters Laboratories and is UL Certified with a Class 1 Rating. The product, the factory and all performance claims are certified by UL under the strictest industry guidelines. Beware of companies that claim certified components vs. a certified product. If the product itself is not certified, you have no way of knowing what you are getting! The Rhino® EQ-300 has a 10-year history of outstanding performance! | *$639.20 |
 | RO Membrane 100 GPD by Filmtec
Brand: Healthy Water Supply
Standard 10" Reverse Osmosis Membrane by Filmtec. 100 Gallons Per Day. | *$59.99 |
 | RO Membrane 50 GPD by Filmtec
Brand: Healthy Water Supply
Standard 10" Reverse Osmosis Membrane by Filmtec. 50 Gallons Per Day. | *$39.99 |
| RO Membrane 75 GPD by Filmtec
Brand: Healthy Water Supply
Standard 10" Reverse Osmosis Membrane by Filmtec. 75 Gallons Per Day. | *$49.99 |
 | Rohl A1435XTCB, Rohl Kitchen Faucets, Column Spout Filter Faucet - Tuscan Brass
Brand: Rohl Part Number: A1435XTCB
Rohl A1435XTCB, Rohl Kitchen Faucets, A1435XTCB, A1435, A1435XTCB, Rohl rohl country kitchen filter faucet in tuscan brass with column spout and mini five spoke handle Rohl Column Spout Filter Faucet A1435XTCB, A1435, A1435XTCB UPC#82443801173 | *$294.00 |
 | ROHL COUNTRY KITCHEN
Brand: Rohl Part Number: A1635XMSTN
C.K FILTER FAUCET ^C^ X-H S.NK | *$742.00 |
 | SAFH2O UV - System Installation Kit - Faucet Kit, Tubing & Saddle Valve
Brand: SAFH2O UV Model: I234-10 Part Number: I234-10
Manufacturer's description: This kit includes a spring-loaded-lever operated sink-mount faucet, self-piercing saddle valve assembly and 6' of 1/4" tubing to make installing your SAFH2O UV system simple. We have included easy to follow, step-by-step instructions and our phone number, should you have any questions along the way. | *$29.00 |
 | Sediment Filter Cartridge
Brand: Kemflo
* Spun bonded polypropylene sediment
* 100% polypropylene
* 25 Micron
* Removes dirt, sand and other sediment particles from your water
* Replace every 6 months or as needed
* Above specification based on independent Lab testing.
This filter is Tested and Certified by NSF International
CLEARWATER FILTRATION
Clearwater8899.C0M | *$8.05 |
 | Sediment Water Filter
Brand: Culligan Part Number: HF-360
Easily installs on 1/2" or 3/4" main cold water line, reduces sediment including dirt, sand, silt, rust and scale particles to extend life of household fixtures and appliances. Eliminates need for additional shut-off valves on cold water lines; half-turn of handle on filter cap shuts off water flow to filter for hassle-free cartridge replacement. Clear to allow monitoring of cartridge life. Dynamically sealing, self-cleaning o-rings prevent leaks and clogging. Use with Nos.CW-MF, S1A, CW-F, or P5 filtercartridges, No.OR-34 replacement o-ring, and/or No.UB-1 mounting bracket. NSF International tested and certified. | *$27.75 |
 | SEISSE Hidrotek Membrane 200GPD
Brand: Seisse
The SEISSE Hidrotek 200 GPD membrane TW30-1812-200G fits most all RO systems. This RO membrane unit will fit most is 200GPD membrane systems. The SEISSE Hidrotek drinking water membranes and filters fit nominal 2-inch I.D. pressure housings. It is a thin film composite membrane with excellent rejection rates and service life. The high rejection rate means better water purity. The membrane should be changed annually. It is made of semi-permeable membrane material with 0.0001 micron filtration precision for separating and removing all bacteria, heavy metal, salt, and other undesirable mineral substances including chemicals. Overall filter dimensions; 12 inches in length and 2 3/4 inch diameter. | *$79.99 |
 | SEISSE Hidrotek Membrane 300 GPD
Brand: Seisse
The SEISSE Hidrotek 300 GPD membrane TW30-3012-300G fits most all RO systems. This RO membrane unit will fit most is 300GPD membrane systems. The SEISSE Hidrotek drinking water membranes and filters fit nominal 2-inch I.D. pressure housings. It is a thin film composite membrane with excellent rejection rates and service life. The high rejection rate means better water purity. The membrane should be changed annually. It is made of semi-permeable membrane material with 0.0001 micron filtration precision for separating and removing all bacteria, heavy metal, salt, and other undesirable mineral substances including chemicals. Overall filter dimensions; 12 inches in length and 2 3/4 inch diameter. | *$89.99 |
 | SEISSE Hidrotek Membrane 50 GPD
Brand: Seisse
The SEISSE Hidrotek 50 GPD membrane TW30-1812-50G fits most all RO systems. This universal RO membrane unit is the ideal membrane replacement for your 10" housing RO system. The SEISSE Hidrotek drinking water membranes and filters fit nominal 2-inch I.D. pressure housings. It is a thin film composite membrane with excellent rejection rates and service life. The high rejection rate means better water purity. The membrane should be changed annually. It is made of semi-permeable membrane material with 0.0001 micron filtration precision for separating and removing all bacteria, heavy metal, salt, and other undesirable mineral substances including chemicals. Overall filter dimensions; 12 inches in length and 1 5/8 inch diameter. | *$29.99 |
 | SEISSE Hidrotek Membrane 75GPD
Brand: Seisse
The SEISSE Hidrotek 75 GPD membrane TW30-1812-75G fits most all RO systems. This universal RO membrane unit is the ideal membrane replacement for your 10" housing RO system. The SEISSE Hidrotek drinking water membranes and filters fit nominal 2-inch I.D. pressure housings. It is a thin film composite membrane with excellent rejection rates and service life. The high rejection rate means better water purity. The membrane should be changed annually. It is made of semi-permeable membrane material with 0.0001 micron filtration precision for separating and removing all bacteria, heavy metal, salt, and other undesirable mineral substances including chemicals. Overall filter dimensions; 12 inches in length and 1 3/4 inch diameter. | *$34.99 |
 | SEISSE Single Lever Chrome Filter Water Faucet
Brand: Seisse
SEISSE Filtered Water Faucet - SEISSE is a Switzerland based company designing only the very best water filtration and purification products, promoting a healthier and Greener tomorrow. All products contain the very best in materials and workmanship and are backed by a 100% LIFETIME Warranty. Your SEISSE Filtered Water Faucet includes: High Grade Chrome Finish faucet, Non Air Gap Technology, ¼" tube connection, ¼" brass mount included, All installation accessories, 100% LIFETIME warranty. Brass Construction - 1.2 GPM / 4.5 LPM @ 60 PSI - Deck Mount on Kitchen Sink or Counter Top - Faucet Height 10 1/2" - Spout Reach 4 3/4" - Spout Clearance 8 1/2" - 1/4 Ceramic Disc Cartridge - Single Hole Mount - 1/4" IPS Inlet Water Line Connection. The best quality at the best price. Don't cut corners when it comes your personal home products. When only the very best will do, buy SEISSE for maintenance-FREE enjoyment. SEISSE. Not just a faucet, but a fashion statement. | *$19.99 |
|
